Maximus Cutty Sark

Any other ship partworks that aren't mentioned above

Re: Maximus Cutty Sark

Sponsor

Sponsor
 

Re: Maximus Cutty Sark

Postby maximus2012 » Mon Apr 28, 2014 12:30 pm

One side is done. Another 700 plates to add to the other side. :o
P1020116.jpg
P1020116.jpg (41.79 KiB) Viewed 2617 times
maximus2012
Captain
Captain
 
Posts: 1355
Joined: Tue Jul 24, 2012 3:06 pm
Karma: 155

Re: Maximus Cutty Sark

Postby maximus2012 » Tue Apr 29, 2014 5:01 pm

Still have to plate the other side. Needed a rest from that job. Will do it tomorrow. Done a few more bits on the top.
P1020122.jpg
P1020122.jpg (85.32 KiB) Viewed 2609 times

P1020123.jpg
P1020123.jpg (84.47 KiB) Viewed 2609 times

P1020124.jpg
P1020124.jpg (79.83 KiB) Viewed 2609 times
maximus2012
Captain
Captain
 
Posts: 1355
Joined: Tue Jul 24, 2012 3:06 pm
Karma: 155

Re: Maximus Cutty Sark

Postby maximus2012 » Sat May 03, 2014 10:19 pm

So far so good, but the poster we got with the kit looks nothing like the bits we are actually getting, I know it says in the small print that the picture is actually not of the build kit. Misleading advert that is. But never mind.
P1020142.jpg
P1020142.jpg (67.74 KiB) Viewed 2600 times

P1020143.jpg
P1020143.jpg (67.84 KiB) Viewed 2600 times

P1020144.jpg
P1020144.jpg (82.67 KiB) Viewed 2600 times

P1020145.jpg
P1020145.jpg (77.18 KiB) Viewed 2600 times
maximus2012
Captain
Captain
 
Posts: 1355
Joined: Tue Jul 24, 2012 3:06 pm
Karma: 155

Re: Maximus Cutty Sark

Postby maximus2012 » Mon May 05, 2014 12:17 pm

Done a bit more.
P1020156.jpg
P1020156.jpg (84.11 KiB) Viewed 2591 times
maximus2012
Captain
Captain
 
Posts: 1355
Joined: Tue Jul 24, 2012 3:06 pm
Karma: 155

Re: Maximus Cutty Sark

Postby maximus2012 » Wed May 07, 2014 12:33 pm

Mast`s and bowspit nearly finished, loads of yard arms to do. Then there is the dreaded rigging. If any of you got one of the deag cutty`s, you will have fun building it. Nothing is rite and all is overscale as well, but it kept me busy for a while yet, I rather build a bad kit then sitting here waiting for bits to continue with something else.
P1020168.jpg
P1020168.jpg (68.62 KiB) Viewed 2583 times
maximus2012
Captain
Captain
 
Posts: 1355
Joined: Tue Jul 24, 2012 3:06 pm
Karma: 155

Re: Maximus Cutty Sark

Postby Mark » Sun May 11, 2014 6:29 am

Looking fantastic Maximus. Can't believe how quickly you're building it !
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 15868
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 407

Re: Maximus Cutty Sark

Postby maximus2012 » Mon May 12, 2014 8:49 pm

Mark wrote:Looking fantastic Maximus. Can't believe how quickly you're building it !

Have to redesign the mast and yards, to thick the dowels I got with the kit and the crows nest and cross trees are awful, 5x5 timbers for the cross trees, should be a maximum of 2x2, the where very nice and detailed on the Victory. Perhaps is shows how old this kit is. Even on the cabins, the overlay witch goes around the Cabin assembly should be of 0,5 ply and not 2 mm thick, but HeHo it will keep me busy while waiting for parts for another model. (Will not mention which one) :laughing-rolling:
maximus2012
Captain
Captain
 
Posts: 1355
Joined: Tue Jul 24, 2012 3:06 pm
Karma: 155

Re: Maximus Cutty Sark

Postby Graham » Fri May 16, 2014 7:07 pm

She's looking so good there - K from me!!
No trees were harmed in the transmission of this message - but a lot of electrons got aggitated.
User avatar
Graham
Sergeant Major
Sergeant Major
 
Posts: 204
Joined: Thu Jun 07, 2012 3:36 pm
Location: Sarisbury Green, Hampshire
Karma: 29

Previous

Return to Other ships

Who is online

Users browsing this forum: No registered users and 2 guests

cron