TERMINATOR T-800 1/2 scale

Re: TERMINATOR T-800 1/2 scale

Sponsor

Sponsor
 

Re: TERMINATOR T-800 1/2 scale

Postby casper » Thu Jul 11, 2019 8:09 pm

Now take the lower jaw form issue 6 and attach the head motor joint from issue 7, It just clips into place with four location pegs.

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Thu Jul 11, 2019 8:14 pm

Now to take the "lower jaw" assembly from issue 5 and after adding the two brass bushes screw them together. The bushes allow a nice stiff joint for the lower jaw to move.

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Thu Jul 11, 2019 8:17 pm

Issue 12
Assembling the right forearm

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Jul 12, 2019 3:28 pm

This was the most challenging assembly so far but still fairly easy.
Each muscle spring has to be superglued in place before the small cover is screwed to the forearm

Image
Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby Morris » Fri Jul 12, 2019 7:08 pm

Been watching this one come together
Morris

'Phase 8' Hachette Easy Rider Captain America now posted
In Very Slow (currently in a holding pattern :( on the 1/18 Pegasus Bell X-1)
1/72 Hasegawa B-47 in progress
User avatar
Morris
Lieutenant
Lieutenant
 
Posts: 907
Joined: Tue Feb 16, 2016 7:21 am
Location: Aberdeen and Filby, Norfolk
Karma: 145

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Jul 15, 2019 8:44 am

Issue 13
Assembling the neck and right finger
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Jul 15, 2019 8:52 am

After fitting the lower neck joint to the left side of the neck its added to the left side of the jaw assembly using two 6mm screws

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Jul 15, 2019 8:52 am

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Jul 15, 2019 8:55 am

Right side added using two 6mm screws. Looks really good apart from the join down the centre of the neck but If not showing on the front it would have been down the sides.
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Jul 15, 2019 8:58 am

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Jul 15, 2019 8:58 am

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Wed Jul 17, 2019 8:38 pm

dry fit :) looking good so far

Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sun Jul 28, 2019 9:32 am

Now to add the push fit (Plastic) screw covers
I added a touch of superglue to the posts to secure them.
Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sun Jul 28, 2019 9:38 am

Now I have my replacement issue 4 I can return to assembling the right upper arm
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sun Jul 28, 2019 9:44 am

simple assembly for the upper arm pistons, one small screw holds a rubber washer/grommet on the end to give a nice seal when pushed together.
Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sun Jul 28, 2019 9:50 am

shoulder joint assembly. Black part was superglued into position using the four location pegs
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sun Jul 28, 2019 9:54 am

The two screws go in from the rear of the assembly so to hold them in place a little bit of blue tac was used till the front section was added and the whole thing was turned over and screwed down.
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sun Jul 28, 2019 9:58 am

Image
Image
Image
Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sun Jul 28, 2019 5:38 pm

Back on track :)
Issue 14
Fourth Finger and Lower arm tubes
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sun Jul 28, 2019 5:40 pm

Tubes are plastic :(
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13186
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 371

PreviousNext

Return to T800 Terminator

Who is online

Users browsing this forum: No registered users and 1 guest