TERMINATOR T-800 1/2 scale

Re: TERMINATOR T-800 1/2 scale

Sponsor

Sponsor
 

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Aug 02, 2019 10:14 pm

Image
Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Aug 02, 2019 10:15 pm

Finger
Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Aug 02, 2019 10:19 pm

As you can see in the above photo I cut two ends off the plastic tube, when I tried it the first time it was over size and the finger was too loose. The chrome studs are push fit but a touch of superglue to the posts makes sure they stay put.
Image
left to dry
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Sat Sep 21, 2019 10:31 am

:)
what's this :think:
opened the box containing issues 23-26 and found this box inside labeled 7th delivery gift. Not sure why its a gift as the T-800 comes with it anyway.
The contents are nicely packaged in a velvety box and and look the great when assembled apart from the join right down the middle along the top. The barrel has a thread to screw into the main body and the trigger assembly and grip are metal, the trigger works so this could be for the lights and sound affects :think:
Image
Image
Image
Image
Image

next to a 18" figure
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Sep 30, 2019 3:00 pm

Issue 15 complete
right hand small finger and left head plate
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Sep 30, 2019 4:38 pm

Issue 16
Assembly of the lower left arm
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Sep 30, 2019 4:41 pm

connect parts to the muscle assembly using one Pm3x12mm screw
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Mon Sep 30, 2019 4:44 pm

Take the three rubber washers and screw then to the ends of the rods and push them home (loose snug fit)

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Thu Oct 03, 2019 2:50 pm

Issue 18
motor for the eye movement
Image

first attach the motor support with two screws then add the motor
Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Thu Oct 03, 2019 2:53 pm

the top jaw screws to the lower jaw assembly with three screws

Image
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Thu Oct 03, 2019 2:53 pm

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 11:48 am

Ok back to issue 17
fitting the sides of the head to the main head plate.
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 11:50 am

also the three small wrist ball joints are screwed in place
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 11:54 am

Issue 19
assembly of the head motor
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 11:56 am

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 11:57 am

Issue 20
assemble and mount the head motor support
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 12:03 pm

Image
Image

then fit the two brackets with four screws
Image

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 12:06 pm

Issue 21
right shoulder joint and and skull assembly

Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 12:11 pm

add the metal dowels to the head plate using a little superglue
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

Re: TERMINATOR T-800 1/2 scale

Postby casper » Fri Oct 04, 2019 12:18 pm

Attach the head plate making sure the step sits in place both sides, tricky to get lined up but a little force pushes it all home.
Then glue in the jaw bolt covers.
Image
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13247
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 372

PreviousNext

Return to T800 Terminator

Who is online

Users browsing this forum: No registered users and 1 guest