GT500 Super Snake [Agora Models]

Agora's first offering. The Shelby Mustang GT500 Super Snake

GT500 Super Snake [Agora Models]

Sponsor

Sponsor
 

GT500 Super Snake [Agora Models]

Postby Levelord » Mon Jan 27, 2020 6:57 pm

Hello everybody,

In this construction diary I would like to show you how to build the GT500 Super Snake from the new partwork provider Agora Model.I hope you enjoy it. Comments are welcome.Lg Sascha


Construction phase 1 - the front

To start with, the quality of the components and the paintwork have been really great so far. I am particularly looking forward to the model's whitewall tires.First we take the front and put it on a soft cloth. From the inside we then lead the grille to the front and screw it together with two MD02 screws.Then we turn the front and attach the bumper from the front. Make sure that the indicated bumpers point upwards.From the inside we screw the bumper with two MP01 screws.Now we insert the headlights from the outside and screw them together with an MD01 screw.


Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Mon Jan 27, 2020 7:00 pm

Construction phase 2 - the left door

It continues with the left door. Put this back on a soft cloth and push the outside mirror into the door from above.Attaches the mirror with two MD05 screws.From the outside we insert the door handle as shown and fasten it from the inside with an MP02 screw.


Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Mon Jan 27, 2020 7:04 pm

Construction phase 3 - the left side window

First we lead the side window from the inside to the door and fasten both with three MD05 screws. Then we put the hinge in the door. The mounting plate is then placed on top and everything is screwed down with an MD06 screw.


Image

Image

Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Mon Jan 27, 2020 7:12 pm

Construction phase 4 - the left door panel

We take the lower chrome strip and insert it into the door trim at the bottom. From the inside we screw both with two MP01 screws.
Then we put the inner door handle in the holding plate and guide both into the door panel. The holding plate is attached with two MP02 screws, the handle itself we attach with an MP03 screw.
The window crank is now also attached from the outside and screwed from the inside, for this we take an MP02 screw.
Now the door trim is placed on the inside of the door and fixed with two MD06 screws.This is followed by the upper chrome strip, which we guide diagonally from above behind the door handle and then carefully fix it.



Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Mon Jan 27, 2020 7:19 pm

Construction phase 5 - the backrest of the driver's seat

We now take the base plate of the backrest and put the chrome plate on it. This is screwed with four MP01 screws.Then the pad is pressed on from the front. The first backrest is now finished.


Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Mon Jan 27, 2020 7:25 pm

Phase 6 - The seat of the driver's seat

At the beginning we take the base plate of the seat and insert the backrest into the slope. Then we put the seat cushion on from above and screw it together from below with four MP01 screws.


Image

Image

Image

Image

Image

Image

Image



Pack 1 is done, hope it goes on like this :D
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby steve131 » Tue Jan 28, 2020 7:35 pm

Great build diary Sascha :clap: ,lovely model.
User avatar
steve131
Brigadier
Brigadier
 
Posts: 4201
Joined: Fri Aug 17, 2012 10:22 am
Karma: 60

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Tue Jan 28, 2020 9:02 pm

Hi Steve,

thank you very much. Looking forward to the next components.
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby casper » Fri Jan 31, 2020 4:41 pm

Looks very nice Sascha 8-)
thanks for showing us your progress
casp
My Honda MP4/4 Build Diary
viewtopic.php?f=80&t=5208
User avatar
casper
General
General
 
Posts: 13668
Joined: Tue Jun 07, 2011 6:23 pm
Location: North Wales
Karma: 380

Re: GT500 Super Snake [Agora Models]

Postby felix_models » Sun Feb 02, 2020 12:43 am

Great build, I have just recieved pack one of this myself. Not had chance to build as yet though but cant wait to dig in. Will be following this build
felix_models
Lance Corporal
Lance Corporal
 
Posts: 19
Joined: Fri Jan 31, 2020 7:59 pm
Karma: 3

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Thu May 14, 2020 9:50 am

Construction phase 07 - the right door


Now we get the right door delivered. We carefully insert the door handle from the outside
and screw it from the inside with an MP02 screw.


Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Thu May 14, 2020 9:51 am

Construction phase 08 - The right door window


It continues with the side window of the right door.
Place the door on a soft cloth so that it does not get scratched.
Then you lead the window pane from the inside to the door as shown and screw it with three MD05 screws.
Now the door hinge follows, we put it in the door as shown and put the mounting plate on it.
We then screw everything together with an MD06 screw.


Image

Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Thu May 14, 2020 9:52 am

Construction phase 09 - The right door trim


Take the inner lining and insert the lower chrome strip. We fasten it from the inside with two MP01 screws.
Then we insert the inner door handle into the mounting plate.
We then insert both together from behind into the inner cladding as shown and screw the mounting plate with two MP02 screws.
We fasten the door handle with an MP03 screw.
Now we take the window crank and put it in the door panel. From the inside we screw it together with an MP02 screw.

Then take the inner panel and insert it inside the door so that the mounting holes are aligned.
Fasten the panel with two MD06 screws.
Finally, we carefully insert the upper chrome strip, which is only inserted.


Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Thu May 14, 2020 9:52 am

Construction phase 10 - the backrest of the passenger


Take the backrest and put the chrome plate on it. We screw these together with four
MP01 screws. Then the backrest pad is placed on the chrome plate.


Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Thu May 14, 2020 9:53 am

Construction phase 11 - the passenger seat


Take the base of the seat and insert the backrest into the small slot.
Then you lead the seat onto the base and put the two together.
From below we then screw the seat to the base with four MP01 screws.


Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Thu May 14, 2020 9:54 am

Construction phase 12 - the rear chassis plate


In this construction phase we receive the rear chassis plate.
There is nothing to build now.


Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Thu May 14, 2020 9:55 am

Phase 13 - The lower half of the gas tank


Test the tank half from below into the rear chassis plate.
It continues in the next construction phase.


Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Levelord » Thu May 14, 2020 9:56 am

Phase 14 - The top half of the gas tank


Insert the filler neck into the tank half and fasten it from the inside with a
MP01 screw.
Then we put the top half of the tank onto the rear chassis from above and screw it down
both tank halves with the chassis. For this we take four MP01 screws.


Image

Image

Image

Image

Image

Image

Image

Image

Image
Levelord
Lance Corporal
Lance Corporal
 
Posts: 16
Joined: Mon Jan 27, 2020 4:14 pm
Karma: 2

Re: GT500 Super Snake [Agora Models]

Postby Mark » Fri May 15, 2020 1:31 am

Looking very nice Sascha.
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16312
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 427


Return to Agora Mustang Super Snake

Who is online

Users browsing this forum: No registered users and 2 guests

cron