Mark's Shelby Cobra

Agora's 1/8 Shelby Cobra. And it's gorgeous!!

Mark's Shelby Cobra

Sponsor

Sponsor
 

Mark's Shelby Cobra

Postby Mark » Wed Oct 07, 2020 5:43 pm

OK, I'm just started, and loving this kit so far!! One of the best looking cars ever built.

Let's leap in with Pack one, stage 1.

Here's the contents of the first stage. The bonnet! Well, what else? (and I get another of their nice screwdrivers!)

Image

Let's take a closer look at a couple of parts first. The barge is beautifully rendered,

Image

The bonnet has a flawless finish, and the metallic blue is to die for! The scoop just drops into place. Am I getting carried away? Sorry..... :oops:

Image

We start the assembly by adding a couple of black sponge strips for the bonnet to rest on.

Image

Then add the scoop.

Image

This is screwed in from the bottom. Restthe bonnet on the polishing cloth to stop it getting scratched. You really don't want scratches in this!!
The more observant may have noticed the rivets cast into the bonnet to represent the rivets that would hold the scoop on the real car. Yes, they are individually picked out in silver!

Image

Put the bonnet catch through the hole.

Image

Add the catch plate.

Image

Then the spring.

Image

Put the spring resining washer on the screw, and screw it in place. Be careful not to strip these - the thread is quite fragile.

Image

Rinse and repeat to fit the second catch. Now I thought that the catches should be pointing backwards with the bonnet latched, but they are pointing outwards on this kit. I've seen pictures on the web of them both ways, and a friend who has an original 1966 Cobra says his point backwards. I may change mine, not sure yet.

Image

This completes stage 1.

Image
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16446
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 436

Re: Mark's Shelby Cobra

Postby Morris » Wed Oct 07, 2020 6:14 pm

Thx for starting this section Mark (agree wholeheartedly- awesome kit thus far) !
Morris

1/28 Sopwith Camel
Hachette Spitfire Mk1a partworks up to including issues 31-34
DeAgonstini Ford GT40 part work pack 5
1/28 Revell Rickenbacker Spad XIII
Agora Models 427 AC Cobra pack 1
User avatar
Morris
Captain
Captain
 
Posts: 1269
Joined: Tue Feb 16, 2016 7:21 am
Location: Aberdeen and Filby, Norfolk
Karma: 169

Re: Mark's Shelby Cobra

Postby steve131 » Wed Oct 07, 2020 8:12 pm

Great work so far Uber jell :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: .Got a friend whom owns a Cobra :mrgreen: :mrgreen: :mrgreen: ever had a drive ? (bet he dont look round the back of the sofa for 50 pence :lol: )
User avatar
steve131
Brigadier
Brigadier
 
Posts: 4298
Joined: Fri Aug 17, 2012 10:22 am
Karma: 65

Re: Mark's Shelby Cobra

Postby Mark » Fri Oct 09, 2020 3:55 pm

steve131 wrote: ever had a drive ?


Sadly not, but I live in hope!

I was going to continue with the diary, but Flickr seems to have taken it's bat home :snooty:
I'll try again later.........
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16446
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 436

Re: Mark's Shelby Cobra

Postby Mark » Fri Oct 09, 2020 4:14 pm

OK, Flickr has brought its bat back, along with a shiny new ball!

Stage 2, the front left wheel

Image

Nice printing on the tyre!

Image

First off, drop the tyre in boiling water and leave it to stew while I assemble the wheel

Image

Assembling the hub is straight forward. 4 screw for the first parts.

Image

Another 4 screws secures the inside rim.

Image

The finished rim looks like this.

Image

Then wrestle the tyre in place.

Image

Now push the chrome trim into the knock-on. It's a friction fit.

Image

Push the brake disc onto the hub.

Image

Screw the brake calliper in place with a small screw. Be careful not to strip the hole, it's a delicate thread.

Image

Push the hub assembly into the wheel.

Image

Then screw the wheel in place from the front.

Image

Finally, drop the knock-on in place. There is a magnet in the back which holds it in place. I found that the magnet fell out if I pulled the knock-on off. However, easily rectified with a spot of glue.

Image

This completes stage 2!
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16446
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 436

Re: Mark's Shelby Cobra

Postby Mark » Fri Oct 09, 2020 4:26 pm

Stage 3. steering wheel and exhaust, etc.

Image

Push the emblem onto the steering wheel! That was easy!!

ImageUntitled by Mark Wakelin, on Flickr

We don't do anything with the seat yet, but it's nicely made of real leather!

Image

The two parts of the exhaust push together.

Image

This completes the stage.
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16446
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 436

Re: Mark's Shelby Cobra

Postby steve131 » Fri Oct 09, 2020 8:18 pm

Feel your pain not having a drive :( .Is the chrome part of the wheel metal ?
User avatar
steve131
Brigadier
Brigadier
 
Posts: 4298
Joined: Fri Aug 17, 2012 10:22 am
Karma: 65

Re: Mark's Shelby Cobra

Postby Mark » Sun Oct 11, 2020 5:45 am

steve131 wrote:Feel your pain not having a drive :( .Is the chrome part of the wheel metal ?


No, the chrome parts are plastic.
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16446
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 436

Re: Mark's Shelby Cobra

Postby Mark » Sun Oct 11, 2020 6:05 am

Stage 4 gives us engine and exhaust.

Image

I rolled the air filter grill round a wooden spoon handle. This gives a nice smooth curl that drops straight into the housing.

Image

It drops in like this.

Image

The housing top goes on nicely. Lovely chrome finish!

Image

Followed by the carb top.

Image

Then the bottom of the carb.

Image

Which then goes into the carb housing. I may add the fuel lines later if I can work out where they go.

Image

This gets screwed onto the head. That's all the work on the engine for now.

Image

Moving on to the exhaust. We start by pushing the 4 into 1 collector onto the silencer.

Image

This has the pipe numbers moulded in, to make assembly idiot proof.

Image

The pipes have numbers moulded into them too!

Image

They push in and are quite stiff. Don't try twisting the pipes in the holes as you'll almost certainly break off the pin. As the instructions say, pull them out and reinsert them in the correct alignment.

Image

All 4 in place, and the manifold end looks like this.

Image

Finally, add the exhaust plate. This is also numbered!

Image

Bolt heads go toward the silencer.

Image

This completes this stage.
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16446
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 436

Re: Mark's Shelby Cobra

Postby Mark » Sun Oct 11, 2020 6:12 am

Stage 5 gives us the oil filter and the other silencer.

Image

As before, the exhaust parts just push together

Image

The oil filter and housing all go together nicely.

Image

This screws onto the engine front spacer and plate.

Image

This completes this stage.
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16446
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 436

Re: Mark's Shelby Cobra

Postby Mark » Sun Oct 11, 2020 6:13 am

Stage 6 completes the other exhaust.

Image

Assembly is the same as the previous exhaust. However, these pipes have small flats on them. The flats face each other when correctly aligned.

Image

This is the completed exhaust.

Image

This completes the stage and pack 1. I can't wait for pack 2!

Just to give Agora a quick plug, you can buy the model here!!

https://www.agoramodels.com/shelby-cobra/
Cheers
Mark

If you nose runs and your feet smell, you're upside down !
User avatar
Mark
Site Admin
Site Admin
 
Posts: 16446
Joined: Wed Aug 26, 2009 10:44 pm
Karma: 436

Re: Mark's Shelby Cobra

Postby Morris » Sun Oct 11, 2020 9:27 am

It is an awesome kit - I was thinking same on adding feed lines to the dual feel carb - most of the dual feed Holleys were plumbed like this ....but it shows angled lines - wonder if lines come later in the kit???
Image
Morris

1/28 Sopwith Camel
Hachette Spitfire Mk1a partworks up to including issues 31-34
DeAgonstini Ford GT40 part work pack 5
1/28 Revell Rickenbacker Spad XIII
Agora Models 427 AC Cobra pack 1
User avatar
Morris
Captain
Captain
 
Posts: 1269
Joined: Tue Feb 16, 2016 7:21 am
Location: Aberdeen and Filby, Norfolk
Karma: 169

Re: Mark's Shelby Cobra

Postby Eagle36 » Sun Oct 11, 2020 12:27 pm

The simplistic carb and intake manifold is a deal breaker for me, along with the incorrect tire lettering font; the prototype lettering was correct, so what happened? Then engine is a basic carryover from the Gt500, which was also very basic and toylike. I have several Kyosho 1/12 die cast models and the detailing is the same level.
Eagle36
Sergeant
Sergeant
 
Posts: 94
Joined: Sat Nov 22, 2014 8:53 pm
Location: New England USA
Karma: 3

Re: Mark's Shelby Cobra

Postby steve131 » Sun Oct 11, 2020 12:32 pm

Do like how they do air filter ,like Morris says think they will supply pipes later.
User avatar
steve131
Brigadier
Brigadier
 
Posts: 4298
Joined: Fri Aug 17, 2012 10:22 am
Karma: 65


Return to Shelby Corba S/C

Who is online

Users browsing this forum: No registered users and 1 guest

cron