I applied some wood stain, usually I would use a rag, but there so were many nooks and crannies, that I applied it with a paint brush and then wiped off the excess with a old sponge. I did this by little sections at a time as not to get an even coverage.
After applying a second coat of stain allowing it to dry in-between coats and after the final one, I then applied some wax with wire wool.
Even though this was going to be a basic model, nothing really detailed, I felt that there were something missing
So I decided to add some rigging using some brass tubing.
This is the finished result
IMG_2694 by
Jess Lee, on Flickr
IMG_2693 by
Jess Lee, on Flickr
IMG_2696 by
Jess Lee, on Flickr
IMG_2695 by
Jess Lee, on Flickr
Thanks for watching
Roy
