Interesting ?

[wingnut2]

Hi guys, For those who may be interested here is my latest purchase it's an "inline moisture trap" if you have one on your compressor (as I do) it's a bit "belt and braces"
but hay ho you can't be too careful in advance sorry for pic quality




Here it is connected to my H&S Infinity.

All things considered It has a good weight to it and sits comfortably in my hand and the overall quality is very good, the threaded plastic to metal connection to the air line is concerning but the use of "PTFE tape" (Polytetrafluoroethylene) or "plumbers tape" from hardware stores (cheap as chips ) which I use anyway on all my "connections"
Anyway it cost me £1.43 in total from Amazon, I haven't road tested it yet (bad hands) but what is there to loose

[b][i]Comments and thoughts welcomed.
TTFN

[steve131]

Looks good , like you say plastic and metal will wear but you got that covered.

[Mark]

I’ve got one that looks the same. Works fine, and I need it here due to the high humidity.
There should be an o ring in the connection to the air brush, but a bit of ptfe tape never hurts.

[wingnut2]

Looks good , like you say plastic and metal will wear but you got that covered.

Hey Duke thanks for "chipping in"

[wingnut2]

I’ve got one that looks the same. Works fine, and I need it here due to the high humidity.
There should be an o ring in the connection to the air brush, but a bit of ptfe tape never hurts.

Thanks Mark !