1/200 Prinz Eugen (scratchbuild)

[poulw]

Hi and thanks for the interest in my build
The work is still in progress, but unfortunately I have had to direct attention to my house over the last year (big gum tree fallen over in storm, urgent repair jobs and complete painting inside/outside, etc,etc)
Over the last month or so I have again worked full time on the Prinz, mounting facials on the decks, finishing all the platforms, and construced the section with the catapult rail for the Arado.
This means that practically the whole superstructure now is complete - which ONLY leaves all the fences, armament, boats, Arados, rangefinders and deck fittings to be completed.
I am still only half way although I have made over 5,200 parts so far.

However, I am having some problems with Photobucket which at the moment is very slow and times out before my log-in can be effectuated, so it's impossible for me to upload pictures at the moment.
As soon as my Photobucket problems are solved the pictures and descriptions will come - have faith (at least I think I do)

[Mark]

Hope you get the Photobucket problems sorted soon. This is one of my favourite builds

[royjess]

Don't get me started on photobucket, been very slow recently, it's all those adds and pop ups

Within the last 12 months I have purchased a faster laptop, but I still find photobucket very slow. I don't know what device you are working from, if using a laptop/computer, I would run a disc clean up, de-fragment, scan for viruses and clean up your browser history all of which may help speed things up. If using a tablet/smart phone, then you might find downloading the photobucket app will run quicker.

I too looking forward to your updates.

[poulw]

Finally my Photobucket seems to work so here are some updates with pictures:

Tower platforms with timber decking

53 Tower platforms.jpg (120.6 KiB) Viewed 3678 times

and seen from underneath

54 Tower platforms underside.jpg (98.28 KiB) Viewed 3678 times

The support platforms for the night rangefinders (placed on the front superstructure) seen here together with the revolving catapult assembly (the catapult is still to come).
The catapult rail was a bit of a nightmare to construct as a 3-sided u-profile from only 0.25mm thick polystyrene sheet - breath too heavily and the rail falls apart
Succeeded at the third attempt though
Also shown is one of the two swing-out wings at the top front of the superstructure

55 Catapult assy + platforms for night RF.jpg (107.36 KiB) Viewed 3678 times

Earlier I finished the main mast on the signals platform where the search light platform also had to fit in (an advanced puzzle in 3D)

56 Signals platf w main mast and seachlight platf.jpg (92.31 KiB) Viewed 3678 times

That'll be all for this time
Now I "just" have to construct the night rangefinders, the domes for the large rangefinders, all the fences and the top of the hangar to completely finish the superstructure.

[royjess]

Looking good, coming along nicely

[Mark]

I see you've got the super-sized match stick again

It's a real pleasure to watch this coming to life Poul.

[poulw]

Night rangefinders finished (just a bit of clean-up needed)

57 Night rangefinder.jpg (90.04 KiB) Viewed 3678 times

and I also finished a couple more loudspeakers that sit throughout the superstsucture

58 Loudspeaker.jpg (52.94 KiB) Viewed 3678 times

they are so small that I can hardly hold them with my tweezers

[poulw]

I like cats. I've had cats myself previously.
BUT
I don't like the cats telling me my "Photo not found" - and definitely not when the cats come from Photobucket

I think you can now guess what I've been spending my time doing over the last few days;
CORRECT ... retrieving all my photos from Photobucket (with success I may add) - and dropped my membership

So, not much time spent on the Prinz since I also have a couple of major projects running on my house; Window replacements, retro insulation etc.

A little bit has been achieved though, so let's see if I can figure out how to show the picture of some of the boat racks on the Prinz
(Sorry forgot the matchstick)

59 boat racks.jpg (56.09 KiB) Viewed 3678 times

Success

This seems to be the way to do it

[poulw]

It has been a while since my last post.
The work on Prinz Eugen is still ongoing, but at a slow pace over the past two years.
A count now shows just over 6,000 parts produced and there is still a long way to go.
I can see that something has happened to the pic I previously uploaded, so I have reloaded it (hopefully it worked).
I'll try to upload a pic here of my 40mm Bofors AA prototype (hope this works too)

60 prototype 40mm Bofors - PG.jpg (130.73 KiB) Viewed 3678 times

I have had to replace my camera lately and should be able to show some nice pics soon.
More updates to follow.

[Mark]

Hi Poul, good to see you again. I’m afraid My hosting company threw an almighty spanner in the works, and I never did manage to recover the photos. Your work is as stunning as ever.

[number1]

No problems seeing the pics poulw, your doing a great job keeping this ongoing, looking forward to the next instalment

[poulw]

It took me roughly an hour to find the old pics and update the thread, so all should be fine now

All 18 of the 40mm Bofors AA are finished, and I have made a prototype of the 20mm Vierling AA (there are 6 of them on the Prinz).

61 prototype 20mm Vierling - PG.jpg (93.29 KiB) Viewed 3630 times

Not quite there yet, but it looks like a good beginning

[steve131]

Great work.

[casper]

Fantastic build poul.
Shame about previous photo bucket photos, I would imagine PB lost a huge amount of members after the 1000 photo rule came in.
looking forward to your next posts.
casp

[poulw]

I have finally finished the work on my house (all single pane glass replaced by double glazing and some complete windows and and sliding doors replaced), so in these covid-19 times I can now use a good chunk of time to work on the Prinz.
After finishing the four torpedo launchers

IMG_6252.JPG (281.49 KiB) Viewed 2343 times

I have now begun work on the boats using vacu-forming - which I also used to make the housing on the torpedo launchers.
The cranes and the racks for the life boats are also finished

IMG_6254.JPG (265.91 KiB) Viewed 2343 times

At the moment I am waiting for some casting and moulding materials needed for the boat construction to arrive by mail.

As my build stands now, my count is 960 items constructed, made from 7245 individual parts.

I hope to be able to post some more photos within a couple of weeks.

[number1]

Glad to see this one again, your doing a fantastic job, looking forward to more instalments.

[poulw]

Glad to see this one again, your doing a fantastic job, looking forward to more instalments.

Thanks for your kind encouragement

I have started on the ship's boats.
The two launch boats are finished (flagstaff and jack-staff to be attached at the very end because of fragility). The 0.2mm forward rails were a nightmare.

I am now working on the Admiral's motor boat and the two long boats.

[poulw]

A bit of progress, but now I remember why I left the boats 'till the end part of the build.
The parts are getting smaller all the time

66 Admirals motor boat.jpg (41.57 KiB) Viewed 1988 times

[poulw]

Finished all the boats:

69 All the ship's boats.jpg (74.69 KiB) Viewed 1322 times

[number1]

You must have good dexterity and patience to carry this out, excellent work on the little boats