Partwork Models Forum

**Sponsor**

by **9JL** » Fri Oct 16, 2009 7:04 pm

Self adhesive metal skinning ? peel the back off and stick down,I wonder ? we will have to wait and see that exciting stage of the construction.

by **chill** » Sat Oct 17, 2009 4:34 pm

Looks like ali that is glued on.

by **9JL** » Sat Oct 17, 2009 7:07 pm

Something comes to mind straight away to do this job,Scotch 3M adhesive spray,it has a working time of aprox 8 minutes to juggle things around,could be useful for this mammoth task ahead.

by **Mark** » Sun Oct 18, 2009 9:50 pm

...or slow setting Araldite.... for those who like plently of time to get things in the right position

by **Russ** » Sun Oct 18, 2009 9:57 pm

What about Two part epoxy resin a small amount

by **chill** » Mon Oct 19, 2009 7:50 am

No More Nails.

Gets his coat.

by **9JL** » Mon Oct 19, 2009 9:34 pm

Mark wrote:...or slow setting Araldite.... for those who like plently of time to get things in the right position

Yes I still like that older version of araldite,most modern epoxies set far too quickly,I tried my rivetting tool out today on some litho plate,it works well,there is a lot of rivets on a Lanc !

Partwork Models Forum

Which material will the skinning be ?

Which material will the skinning be ?

Which material will the skinning be ?

Re: Which material will the skinning be ?

Re: Which material will the skinning be ?

Re: Which material will the skinning be ?

Re: Which material will the skinning be ?

Re: Which material will the skinning be ?

Re: Which material will the skinning be ?

Who is online